Apr 22, 2021
645
Located at the output of the three keytracked filters, the Layer Output module offers a clean and smooth distortion that can go from subtle thickness up to a powerful growl. Use it to enhance the harmonics of your sounds.
-
soft clipper
Adjust the amount of distortion induced on your layer. When set to 0, no distortion will be applied to the incoming signal. While increasing the soft clipper parameter, volume, distortion and compression will appear.
-
gain
The Gain knob sets the output level of the layer. You can use it to compensate for the volume increase induced by the soft clipper, preventing internal audio distortion.