![][1] The Config menu gives you access to 4 standard configurations that help match the messages sent by Osmose with what is supported by your external synthesizers. Those configurations also contain a dedicated sensitivity setting. ℹ Your last configuration will be kept when turning Osmose off. ℹ External MIDI co...
Osmose’s Augmented Keyboard Action sends MPE+ messages to the internal EaganMatrix sound engine. MPE+ is what Haken Audio calls their optimized extension to the MPE standard (MIDI Polyphonic Expression). You will find more information on its specifities here:[ https://www.hakenaudio.com/mpe][1] If you wish to trigger...
Touche and Touche SE don't support MPE. MIDI Polyphonic Expression (MPE) is a standard that allows you to modulate the timbre and pitch separately for every single note within a polyphonic performance. Since there is no possible way for Touche to differentiate which note of your real-time performance or a pre-recorde...
For the time being, Lie is not supporting MPE. This means that you won't be able to separately control the pitch and timbre of individual notes played at the same time, even if you connected an MPE controller to input notes into Lie. ...
Apart from being a standalone synthesizer with an inbuilt sound engine, Osmose can also be used as an advanced MIDI controller for external software and hardware. As such, Osmose is fully downward compatible. It means that with Osmose, you will be able to control any external synth that you are already able to control ...
Even if your synth doesn't support MPE and if you didn't go for a Multi- channel workaround, you can still make use of the three expression zones of the Augmented Keyboard action. The three expression zones will work in the same way as if you would use an encoder or a fader on your synth. It means that the pressure you...
Normally, when you tweak the sound or when you bend the pitch of your synthesizer, all notes that you play at that time will be affected in the same way, on a global basis. Instruments that support MPE allow you to control the timbre and pitch of every single note of a polyphonic performance independently from other n...
To make sure that the sounds from MPE Collection respond well to your playing on your ROLI instrument, launch ROLI Dashboard and set the Slide Mode to 'Relative Unipolar'. ![][1] If you are using a Seaboard RISE, please also adjust the touch strips on the instrument as follows: * Glide: 100% * Slide: 50% * Pre...
Arche is not supporting MPE functionality for the time being. The instruments of the Arche Collection, just like a real violin, viola, and cello, are mainly monophonic instruments. On top of that, they feature a duophonic mode, that allows you to play so-called double-strokes on the instrument. You can however not mod...
![][1] As mentioned in the article [Connect Osmose to your computer][2], two USB MIDI ports will show up on your USB host device (usually your computer) when Osmose is connected: Osmose Play and Osmose Haken. Adding the DIN MIDI 5-pin jacks to the equation, Osmose has a total of three MIDI ports. The MIDI I/O tab ...